Description
The Domus Full Mattress Replacement System is a high quality pressure relieving surface suitable for clients with medium to high risk of Ischemic Ulcer formation. The combination of specially designed cells incorporated with a low pressure high flow pumping system, offering both alternating or low air flow functions. This enables maximum pressure reduction and pressure relief simultaneously. The full mattress replacement system incorporates 20 cells, with the top 3 cells providing a non-alternating pillow section and the lower 4 cells non-alternating heel relief.
The remaining cells have a combination of ventilated and non-ventilated cells and have cell in cell technology, to provide additional protection for clients in case of power failure. The inner cells provide a nominal support when the pump is unable to supply air pressure due to prolonged times of power failure. Features of the pump unit include 10 comfort level adjustments, incremented in weight levels for a range of client needs.
Maximum firm mode with auto revert to alternating after 20 minutes, low pressure alarm indicated by an audible sound and visual LED indicator. Smart pressure detection technology starts and stops the pump as required, therefore increasing the pump life expectancy, and reducing noise. Multi therapy modes assist carers and therapists in providing appropriate pressure care and improve client compliance. The lock out feature ensures peace of mind once the unit is correctly set to individual needs. A power failure alarm and service alarm alert users or carers of the need for urgent action. The ventilated cells allow for low air loss circulation assisting in reducing perspiration and increasing client comfort.
The fully enclosed zippered cover is stretchable, vapour permeable, waterproof, and antimicrobial with welded seams consistent with Australian infection control guidelines.
The Mattress size is 200cm (L) x 90cm (W) x 20cm (H) Inflated.
Picklist Item Code – AX.Domus4/8″
| Specifications | Height | 20cm |
| Width | 90cm | |
| Length | 200cm | |
| Safe working load | 200kg | |
| Sizes available | Single | |
| Features | Material used – mattress | Cell: Nylon/PU; Base: Nylon/PVC |
| Material used – mattress cover | Antimicrobial Silver+ Vapor permeable and water resistant vinyl cover with a level | |
| Firm edge yes/no | Firm when in static mode | |
| Mattress zoning yes/no | Yes- heel relief | |
| CPR safety feature – yes/no, position | Yes | |
| Alternating Air Only | Safety features | The digital multi-mode pump is not only offering alternating pressure redistribution, but also has a static mode with constant low pressure reduction. In alternating mode, the pressure is periodically redistributed by inflating and deflating cells in order to mimic natural sleep movement. In constant static mode, the pressures is about 2/3 lowered when compared to the same pressure level from alternating mode by the means of immersion and envelopment.The system also offers advanced features such as seat inflation and max firm features. With both audible and visual alarms |
| Low pressure alarm | Yes | |
| Cell cycle options | Cell-on-Cell Bladder The bottom cells acts as basic pressure support to avoid bottoming out in case of power failure | |
| Cell height | 20.3cms | |
| Minimum consumer weight (if applicable) | 40kg |
